OK Tigrod NiCr-3
Bare Ni-Cr rods for welding of high alloyed heat-resisting and corrosion resisting materials, 9%Ni-steels and similar steels with high notch toughness at low temperatures. Also for joining of dissimilar metals of the types mentioned. The weld metal has very good mechanical properties at high and low temperatures. Good resistance to stress corrosion.
Typical Charpy V-Notch Properties
| as welded | ||||
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 40 % | 650 MPa (94 ksi) | 400 MPa (58 ksi) |
Classifications
| Wire Electrode |
SFA/AWS A5.14 : ERNiCr-3 EN ISO 18274 : S Ni 6082 (NiCr20Mn3Nb) |
Approvals
| Approvals |
NAKS/HAKC 2.4 mm VdTÜV 19531 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Alloyed nickel (Ni + 20 % Cr + 3 % Mn + 2.5 % Nb) |
| Shielding Gas | I1, R1 (EN 439) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | Fe | Mn | Nb+Ta | Ni | Si | ||||||||
| 0.04 % | 20.0 % | 1.3 % | 3.0 % | 2.5 % | bal % | 0.2 % | ||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.