Exaton

Exaton 309LMo

The following items have been added to your list


x

22.15.3.L is an austenitic filler material for joining stainless steels to carbon steels or low-alloy steels and for overlay welding. It is used for MIG/MAG welding.

BUY NOW


Typical Charpy V-Notch Properties

as welded

Typical Tensile Properties

ConditionElongationShielding GasTensile Strength Yield Strength
As Welded31 %ISO610 MPa (88 ksi)450 MPa (65 ksi)

Recommended Welding Parameters

Current Voltage Wire Diameter Wire Feed Speed
40-120 A 15-19 V 0.8 mm (0.030 in.) 4.0-8.0 m/min (157-315 in./min)
150-260 A 24-29 V 1.2 mm (0.047 in.) 3.0-10.0 m/min (118-394 in./min)
230-350 A 25-30 V 1.6 mm (1/16 in.) 3.0-5.0 m/min (118-197 in./min)

Classifications

Wire Electrode EN ISO 14343-A : G 23 12 2 L
SFA/AWS A5.9 : ER(309LMo)
EN 10088-1 : ~1.4435

Consumable Characteristics

Shielding Gas M12, M13 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
Al B C Co Cr Cu FN WRC Mn Mo N Nb Ni P S Si Ta Ti V W
0.002 % 0.0007 % 0.02 % 0.05 % 21.0 % 0.08 % 8 % 1.3 % 2.6 % 0.07 % 0.01 % 14.5 % 0.02 % 0.002 % 0.33 % 0.005 % - 0.07 % -
Typical Wire Composition %
0.002 % 0.001 % 0.01 % 0.05 % 21.5 % 0.1 % 10 % 1.4 % 2.6 % 0.06 % 0.01 % 15.1 % 0.015 % 0.003 % 0.35 % 0.005 % 0.002 % 0.06 % 0.02 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Exaton 309LMo
S654089820 FIND A DISTRIBUTOR
S654082110 FIND A DISTRIBUTOR
S654084600 FIND A DISTRIBUTOR
S654123800 FIND A DISTRIBUTOR
S654129820 FIND A DISTRIBUTOR
S654169820 FIND A DISTRIBUTOR

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..