OK Autrod Ni-1
A continuous solid nickel based electrode alloyed with about 3% Ti for welding of high purity nickel (min 99.6%Ni), ordinary wrought nickel and nickel with reduced C content. The weld metal can be used in a wide range of applications were the construction is working with corrosive media.
Deposition Data
| Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
| 70-190 A | 1.3-4.8 kg/h (2-10 lb/h) | 0.8 mm (0.030 in.) | 20-27 V | 5.0-18.0 m/min (197-709 in./min) |
| 100-200 A | 2.5-5.5 kg/h (5-12 lb/h) | 1.0 mm (0.040 in.) | 21-27 V | 6.0-13.0 m/min (236-512 in./min) |
Classifications
| Wire Electrode |
SFA/AWS A5.14 : ERNi-1 EN ISO 18274 : S Ni 2061 (NiTi3) |
Approvals
| Approvals |
VdTÜV 12658 (MV) VdTÜV 12664 (FP) |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Nickel (Ni + 2.5 % Ti) |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| Al | C | Cu | Fe | Mn | Ni | P | S | Si | Ti | |||||
| 0.1 % | 0.02 % | 0.1 % | 0.2 % | 0.4 % | 93 % | 0.01 % | 0.01 % | 0.3 % | 3 % | |||||
| Typical Wire Composition % | ||||||||||||||
| 0.06 % | 0.01 % | 0.01 % | 0.04 % | 0.4 % | 96 % | - | - | 0.5 % | 3.1 % | |||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.