Pipeweld 111T-1
An all positionable rutile flux cored wire that is used with Ar-CO2 shielding gas.This wire offers excellent weldability. Suitable for up to X100 strength pipe.
Typical Charpy V-Notch Properties
| As Welded | |
| Impact Value | 44 ft-lb |
| Impact Value | 60 J |
| Shielding Gas | M21 shielding gas |
| Testing Temperature | -40 °F |
| Testing Temperature | -40 °C |
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 19 % | M21 shielding gas | 840 MPa (122 ksi) | 761 MPa (110 ksi) |
Deposition Data
| Current | Deposition Rate | Diameter | TTW Dist. | Voltage | Wire Feed Speed |
| 150-350 A | 2.1-7.5 kg/h (4.6-16.5 lb/h) | 1.2 mm (.045 in.) | 21-32 V | 5.6-19.8 m/min (2.2-7.8|ft/min in./min) | |
| 205-230 A | 1.2 mm (.045 in.) | 12.7-19 mm (1/2-3/4 in.) | 25-27 V | 660-965 cm/min (260-380 in./min) | |
| 135-205 A | 1.2 mm (.045 in.) | 9.5-12.7 mm (3/8-1/2 in.) | 23-26 V | 381-660 cm/min (150-260 in./min) | |
| 230-265 A | 1.2 mm (.045 in.) | 19-25.4 mm (3/4-1 in.) | 26-30 V | 965-1321 cm/min (380-520 in./min) |
Classifications
| Weld Metal |
SFA/AWS A5.36 : E111T1-M21A4-K3-H4 SFA/AWS A5.29 : E111T1-K3MJ-H4 EN ISO 18276-A : T 69 4 2NiMo P M21 2 H5 |
Consumable Characteristics
| Alloy Type | Low Alloy (Ni Mo) |
| Shielding Gas | M21 (EN ISO 14175) |
| Welding Current | DC+ |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | Mo | Ni | Si | ||||||||||
| 0.055 % | 1.21 % | 0.4 % | 2.3 % | 0.39 % | ||||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.