10 Tips for Evaluating Robotic Torches

By Jimmy Howell, Robotic Product Manager, ESAB

The difference between the optimum robotic torch and an adequate robotic torch could mean the difference between hitting your weekly quality and productivity goals and scrambling to ensure on-time delivery. To help you select the correct torch for your application — and to maximize uptime, quality and profitability – consider 10 key points.

1. Understanding Tool Center Point

Tool Center Point, or TCP, is a point in space with a mathematical reference to the flange of a robot. For robotic GMAW welding, this is essentially how the robot knows where the tip of the wire is. Robots are good at repeating the same motion path time after time. If the tip of the wire changes due to thermal or physical distortion, the weld placement will change. In severe cases, the torch will crash into the part or weld fixture.

A change in TCP stability means that the robot will deposit the weld bead somewhere other than the center of the joint. When this happens, operators may compensate for TCP drift by increasing bead width, such as by slowing travel speed or programming a slight weave into the torch movement, to ensure that the weld encompasses both plates and provides sufficient fusion. Unfortunately, larger-than-necessary weld beads increase filler metal and gas costs, cycle time, heat input and total weld cost. In short, compensation kills profitability in automated welding, and it may compromise mechanical properties as well. Selecting a robotic torch with a consistent TCP can be the first step in welding improvement and reducing filler metal consumption.

2. Tool Center Point stability trumps all

TCP is, by far, the most important attribute to consider when evaluating robotic torches. To ensure a consistent and repeatable TCP, look for robust necks and mounting systems. For example, ESAB machine’s the neck of its Aristo® RT robotic torches from a solid piece of stainless steel and then overlays a brass body to prevent spatter from adhering. These necks have a wall thickness three times that of necks made from extruded brass tubing and, as a result, can withstand a collision and still maintain TCP. Further, they hold dimensional tolerances over time. They’re so robust that TCP alignment tools aren’t needed (and, in fact, can’t even bend the neck). As a result, ESAB offers a 100% TCP guarantee. Comparatively, less robust necks require TCP neck alignment after a certain number of heating and cooling cycles, and a much-needed alignment may not coincide with scheduled maintenance.

3. Evaluating mount and neck bend combinations

While a 22-degree mount with a 22-degree torch basically offers the same amount of bend as a 0-degree mount with a 45-degree neck, the latter combination works better for welding small circles, such as around an axle. With a 45-degree neck, the torch can spin around the 6th axis of the robot (where the torch mounts to the robot arm) in smaller circles. Conversely, a 0-degree mount with a 22-degree neck works well when you need to reach into a small opening.

If you have one application best suited for a 45-degree neck and another application where a 22-degree neck works better, select an Aristo torch bundle with a modular design. This lets you pull the neck off the torch bundle (without tools) and insert the neck best suited for the application. For job shops, this modular approach adds flexibility and reduces changeover time between parts.

4. Infinite rotation torch vs. standard torches

The answer depends on how many points require programming and the amount of air movement time. The external cables of a conventional torch limit arm rotation. After making a circular weld, the next point in the program brings the torch to a safe space and unwinds the cable. With an infinitely turning media coupling of an Aristo Infiniturn torch, the arm can move directly to the next weld. Infiniturn torches reduce programming time, as well as reduce unproductive air time. For parts with many circular welds, an Infiniturn torch will reduce per-piece costs compared to a conventional torch. As an added advantage, locating the media coupling inside the robot arm protects it from damage, as well as extends the life of the cable.

5. Test the torch configuration

Before part production begins, take a 3D model of your part and test it in virtual reality. This will ensure correct torch selection prior to purchase.

6. Consider a particle jet cleaning station

Conventional mechanical reamers clamp the torch nozzle, which may deform the nozzle and distort gas flow and affect TCP. Second, the reamer wears the consumables faster, and the process of mechanically scraping the nozzle and contact tip may have TCP implications. Third, reamers cannot remove spatter from the gas baffle, potentially leading to gas flow interruptions and inconsistent weld quality.

Conversely, the JetStream RT particle jet torch cleaning station cleans consumables with a high velocity blast of aluminum oxide particles. It cleans all torch components (nozzle, tip, gas baffle) and does so without mechanically gripping the torch. As a result, the JetStream extends consumables life, preserves TCP and maximizes uptime.

7. Nozzle stability

With threaded nozzles, the threads become loose due to thermal changes in the constant heating and cooling cycles. A compression-fit nozzle slides over the end of the torch. It, too, becomes loose over time with repeated removal and thermal changes, and a fast air move could possibly throw the nozzle. ESAB combines both threaded and compression-fit technologies. This enables the compression fitting to hold the nozzle in place, even as the torch heats up and the threads loosen.

8. Consider an integrated blow out line

An integrated blow out line is a second gas line (the first being the shielding line) that connects to shop air. During air movement time, the blow out line enables using basically free shop air to cool the torch instead of expensive shielding gas. This can lengthen consumable life and improve TCP stability.

9. Use the longest lasting consumables possible

When analyzing consumables, you need to consider both the cost of downtime and consumable cost difference. In most cases, the downtime costs are significantly higher than the cost of premium consumables. ESAB recommends that you use the longest-lasting contact tip and consumables you can find, as they will help prevent unplanned downtime and lower weld cost.

10. Don’t let conduit liners be a drag

Frequent arm rotation combined with the heat of the weld puts constant pressure on automated MIG gun liners. Liners that use a flat wire with a larger surface area can create more resistance and wear faster, sometimes in as little as three weeks. For longer time between liner changes, Tweco® conduit liners feature a round piano wire (a tempered, high-carbon steel), which minimizes drag, enhances wire feed performance and extends liner life. Note that Tweco universal conduit liners are also available. Simply by changing an adapter to match the brand, they can work with any MIG gun, either robotic or hand-held.