m2 200i Plasma Cutting Systems

ESAB

m2 200i Plasma Cutting Systems

The following items have been added to your list


x

ESAB m2 200i
Easy-to-use, 200 amp mechanized plasma system for production cutting of mild steel, stainless steel and aluminum. Manual Gas Control allows plasma and secondary gas pressures to be precisely controlled at the power supply with individual regulators. Plasma gas can either be Air, Oxygen, Nitrogen, or Argon- Hydrogen (manual change required).

Lower Cost per Part
High cutting speeds and cut quality with minimal dross, reduced warping and a small heat-affected zone results in fewer secondary operations further reducing the overall costs of production. Use air plasma gas for the lowest possible cost per part, choose oxygen or nitrogen when the application demands higher cut quality.

Superior Reliability
A full 100 percent duty cycle enables the system to handle the most demanding production requirements with the highest reliability. The SpeedLok design of the m2 200i torch provides the fastest consumable change in the industry and concentricity for repetitive cut quality.


Features

  • Micro-Processor Controlled 200 amp plasma system for heavy-duty mechanized cutting applications
  • Only plasma system in this range that offers WMS (Water Mist Secondary) for excellent cut quality on non-ferrous materials
  • Patented SpeedLok™ Torch for fast consumable changes
  • Fan and pump on demand technology enhances reliability


Dimensions

Dimensions 1031 x 698 x 1219 mm (40.6 x 27.5 x 48.0 in.)

Cutting Specifications

Pierces 35 mm (1.25 in.)
Maximum Edge Start 50 mm (2 in.)

Operating Specifications

Conditional Statement
Application Classification
Air Service Gas, Plasma
Air Service Gas, Shielding
Minimum Water Supply
Open Circuit VAC High

Weight

Weight 215 kg (475 lb)

Input Ratings

Amps 63 A @ 380 V
60 A @ 400 V
50 A @ 480 V
Frequency Hz 50/60 Hz
Phase 3

Output Ratings

Conditional Statement (@ 104ºF / 40º C)
Amp High 200 A
Amp Low 5 A
Duty Cycle 100 %
Output Current DC 200 A
VDC Out 170 VDC
Output Power 40 kW
x

How to purchase m2 200i Plasma Cutting Systems

We're as eager to put ESAB gear in your hands as you are to have it.  That's why we sell our products with distributors who'll give you the attention, support, and value you deserve.  Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.

To make things even easier, we've developed the online shopping list below.  As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet.  And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site.  Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.


Part Numbers and Accessories

x
x

x

Loading..