EXATON 79S NEUTRAL FLUX FOR 625-TYPE ALLOY STRIP CLADDING LOWERS STRIP COSTS AND CLADDING TIME BY UP TO ONE-THIRD
November 3, 2021
To create a weld metal deposit with the same metallurgy as the filler metal, Exaton, an ESAB brand, has introduced Exaton 79S flux, a neutral, very high basic agglomerated flux for electroslag strip cladding. It was designed especially for use with Exaton Ni60 strip, a nickel-based strip used to produce a weld overlay with good corrosion resistance and high-temperature properties for petrochemical, oil and gas applications.
“The formulation of Exaton 79S enables users to complete the cladding process in fewer passes, saving customers approximately one-third of the cost in strip and manpower compared to the other fluxes used with alloy 625-type strips,” says Paolo Torchiana, Global Product Manager, ESAB.
Exaton 79S flux has added niobium content to compensate for element loss during the strip cladding process. This neutral flux guarantees that the metallurgy of the weld metal deposit equals the weld metallurgy of the strip, an important requirement in the marketplace. With Exaton 79S, the niobium, chromium and molybdenum content of the deposited weld metal is not sensitive to welding parameters. As a result, it is suitable for welding at higher travel speeds. The flux also has low viscosity, making is suitable for cladding with nickel alloys due to its good wetting behavior. It also gives excellent slag removal and bead appearance.
Exaton 79S meets EN ISO 14174 standards and is available in 25 kg steel buckets delivering higher moisture protection and decreased risk of packaging damage. There is no need to redry the flux prior to use onsite because the packaging protects the flux from any moisture absorption during transport and storage, unless requested by tough technical specifications.
Exaton 79S is a neutral flux for use with Exaton Ni60 strip that lets users in the petrochemical, oil and gas industries lower strip cladding costs and time by one-third.