Exaton 22.12.HT is an austenitic filler material for welding the high temperature steel grade Sandvik 253 MA*, UNS S30815. It is characterized by high creep strength, good resistance to oxidation and good weldability. It is used for MIG/MAG welding.
Typical Charpy V-Notch Properties
Typical Tensile Properties
|Condition||Elongation||Tensile Strength||Yield Strength|
|As Welded||35 %||720 MPa (104 ksi)||530 MPa (77 ksi)|
Recommended Welding Parameters
|Current||Voltage||Wire Diameter||Wire Feed Speed|
|60-220 A||15-28 V||1.0 mm (0.040 in.)||4.0-12.0 m/min (157-472 in./min)|
|150-260 A||24-29 V||1.2 mm (0.047 in.)||3.0-10.0 m/min (118-394 in./min)|
EN ISO 14343-A : G 21 10 N
EN 10088-1 : 1.4835
|Approvals are based on factory location. Please contact ESAB for more information.|
|Shielding Gas||I1 (EN ISO 14175)|
Typical Weld Metal Analysis %
|Typical Weld Metal Analysis %|
|0.003 %||0.0002 %||0.08 %||0.04 %||0.04 %||20.7 %||0.06 %||6 %||0.6 %||0.08 %||0.17 %||0.005 %||9.9 %||0.024 %||0.0009 %||1.6 %||0.002 %|
|Typical Wire Composition %|
|0.01 %||0.0008 %||0.07 %||0.04 %||0.05 %||21.0 %||0.1 %||9 %||0.5 %||0.1 %||0.17 %||0.01 %||10.2 %||0.020 %||0.0007 %||1.6 %||0.005 %|
How to purchase Exaton 22.12.HT
We're as eager to put ESAB gear in your hands as you are to have it. That's why we sell our products with distributors who'll give you the attention, support, and value you deserve. Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.
To make things even easier, we've developed the online shopping list below. As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet. And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.