OK Tubrodur 60 G M
OK Tubrodur 60 G M deposits a weld metal with a structure consisting of evenly divided, hard chromium carbides in a martensitic matrix, with a hardness of HV 600-700. It is suitable for hardfacing parts subjected to extremely severe service conditions involving a combination of impact and abrasion. The weld deposit can only be machined by grinding. It is advisable to apply no more than three layers of weld metal. When badly worn surfaces have to be rebuilt, it is recommended to begin by using a tougher weld metal. Applications: • Mill hammers • Parts of agricultural equipment • Earth-moving equipment • Grinders for animal carcasses
|Current||Deposition Rate||Diameter||Voltage||Wire Feed Speed|
|150-450 A||1.8-9.0 kg/h (4-19 lb/h)||1.6 mm (1/16 in.)||21-40 V||2.4-11.9 m/min (94-469 in./min)|
|150-350 A||2.2-7.0 kg/h (4-15 lb/h)||1.2 mm (0.045 in.)||18-34 V||5.3-16.4 m/min (209-646 in./min)|
DIN 8555 : MF6-55GP
EN 14700 : T Z Fe2
|Alloy Type||5%Cr 1%Mo|
Typical Weld Metal Analysis %
|Typical Weld Metal Analysis %|
|0.67 %||5.33 %||0.78 %||1.00 %||0.71 %|
How to purchase OK Tubrodur 60 G M
We're as eager to put ESAB gear in your hands as you are to have it. That's why we sell our products with distributors who'll give you the attention, support, and value you deserve. Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.
To make things even easier, we've developed the online shopping list below. As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet. And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.