OK Tubrodur 58 O/G M

The following items have been added to your list


OK Tubrodur 58 O/G M is a self- or CO2-shielded, flux-cored wire for hardfacing with a hardness of 55-60 HRC. It is designed for hardfacing feed screws, mixer blades and vessels and ring grooves on diesel-engine pistons.

Deposition Data

Current 200-300 A
Deposition Rate 5-12 lb/h
Deposition Rate 2.4-5.5 kg/h
Diameter 1/16 in.
Diameter 1.6 mm
Voltage 28-36 V
Wire Feed Speed 276-496 in./min
Wire Feed Speed 7.0-12.6 m/min


Grade T Fe6
Name EN 14700

Consumable Characteristics

Alloy Type Martensitic steel weld metal
Welding Current DC+

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
Al C Cr Mn Mo Si
No shielding gas
0.6 % 0.42 % 4.89 % 1.22 % 1.14 % 0.31 %

How to purchase OK Tubrodur 58 O/G M

We're as eager to put ESAB gear in your hands as you are to have it.  That's why we sell our products with distributors who'll give you the attention, support, and value you deserve.  Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.

To make things even easier, we've developed the online shopping list below.  As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet.  And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site.  Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.

Part Numbers and Accessories