OK Tubrodur 35 G M

The following items have been added to your list


OK Tubrodur 35 G M is a CO2-shielded, flux-cored wire for the hardfacing deposit of a manganese-chromium-molybdenum-alloyed weld metal. It is used for the surfacing of wheel runners, wheels and rollers for conveyor belts, wheels for mine trucks, rolls and shafts.

Deposition Data

Current 250-350 A
Deposition Rate 5-15 lb/h
Deposition Rate 2.4-6.8 kg/h
Diameter 1/16 in.
Diameter 1.6 mm
Voltage 28-34 V
Wire Feed Speed 197-496 in./min
Wire Feed Speed 5.0-12.6 m/min


Grade T Fe1
Name EN 14700

Consumable Characteristics

Alloy Type Martensitic steel weld metal
Welding Current DC+

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Mn Si
C1 shielding gas
0.21 % 1.47 % 1.40 % 1.10 %

How to purchase OK Tubrodur 35 G M

We're as eager to put ESAB gear in your hands as you are to have it.  That's why we sell our products with distributors who'll give you the attention, support, and value you deserve.  Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.

To make things even easier, we've developed the online shopping list below.  As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet.  And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.

To find an ESAB distributor, just use the distributor locator tool featured on every page of our site.  Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.

Part Numbers and Accessories

Part Numbers : OK Tubrodur 35 G M