OK Autrod 13.23
OK Autrod 13.23 is a 0.9 Ni-alloyed (ER80S-Ni1), copper-coated, solid wire for the GMAW of low-temperature, fine-grained steels. The wire provides good impact toughness down to -50°C and is especially suitable for use in the offshore industry.
Typical Charpy V-Notch Properties
| Impact Value | Testing Temperature | |||
| as welded aws 80ar/20co2 | ||||
| 70 J (52 ft-lb) | -46 degC (-51 degF) | |||
| 20 J (15 ft-lb) | -60 degC (-76 degF) | |||
| 130 J (96 ft-lb) | 0 degC (32 degF) | |||
| 150 J (111 ft-lb) | 20 degC (68 degF) | |||
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 30 % | AWS 80Ar/20CO2 | 560 MPa (81 ksi) | 480 MPa (70 ksi) |
Deposition Data
| Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
| 80-280 A | 1.0-5.4 kg/h (2-11 lb/h) | 1.0 mm (0.040 in.) | 18-28 V | 2.7-14.7 m/min (106-579 in./min) |
| 120-350 A | 1.5-6.6 kg/h (3-14 lb/h) | 1.2 mm (0.047 in.) | 20-33 V | 2.7-12.4 m/min (106-488 in./min) |
| 40-170 A | 0.4-2.6 kg/h (0-5 lb/h) | 0.8 mm (0.030 in.) | 16-22 V | 2.0-10.8 m/min (79-425 in./min) |
Classifications
| 2 | |
| Grade | ER80S-Ni1 |
| Name | SFA/AWS A5.28 |
Approvals
| Approvals |
BV SA4Y40M NAKS/HAKC 1.0MM |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Low alloyed (1 % Ni) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | Cu | Mn | Mo | Ni | P | S | Si | V | |||||
| 0.07 % | 0.07 % | - | 1.11 % | 0.29 % | 0.9 % | - | - | 0.57 % | - | |||||
| Typical Weld Metal Analysis % | ||||||||||||||
| Ar/1-5%O2 (M13) | ||||||||||||||
| 0.08 % | 0.01 % | 0.15 % | 1.0 % | 0.25 % | 0.9 % | 0.01 % | 0.01 % | 0.7 % | 0.01 % | |||||