Filarc PZ6116S
An all-positional rutile cored wire with good toughness down to -60ºC for use with C1 shielding gas. Diameters of less than 1.4 mm are all positional, with the exception of vertical down.
Typical Charpy V-Notch Properties
| As Welded | |
| Impact Value | 51 ft-lb |
| Impact Value | 69 J |
| Testing Temperature | -76 °F |
| Testing Temperature | -60 °C |
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 24 % | 624 MPa (91 ksi) | 553 MPa (80 ksi) |
Deposition Data
| Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
| 150-350 A | 2.1-7.5 kg/h (4-16 lb/h) | 1.2 mm (0.045 in.) | 23-35 V | 5.6-19.8 m/min (220-780 in./min) |
| 150-450 A | 1.8-8.1 kg/h (4-17 lb/h) | 1.6 mm (1/16 in.) | 24-36 V | 2.8-12.4 m/min (110-488 in./min) |
Classifications
| Weld Metal |
EN ISO 17632-A : T 46 6 1.5Ni P C1 1 H5 SFA/AWS A5.29 : E81T1-K2 C JH4 |
Approvals
| Approvals |
ABS 3SA H5, 3YSA H5 ABS 3YSA H5 BV S5Y46H5 CE EN 13479 DNV-GL V Y46MS(H5) LR 5Y40S H5 LR 5Y40 PRS 3YS H5 RINA 4Y S RS 5Y42MSH5 |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Low alloy |
| Welding Current | DC+ |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | Ni | Si | |||||||||||
| 0.054 % | 1.38 % | 1.42 % | 0.43 % | |||||||||||